Pharma Fabtm Industries

(ISO 9001 : 2015 & GMP Certified Company)

Pharma Fabtm Industries

(ISO 9001 : 2015 & GMP Certified Company)

Double Cone Blender

Application :

“ PHARMA FAB INDUSTRIES “ Double Cone Blenders are used for mixing, lubricating and blending in Pharmaceutical, Nutraceutical, Food, Chemical, cosmetics, ceramics, pesticide, plastics and other Allied industries.

Process :

  • The Double shape blenders have long two corner of product container for more rubbing and tumbler effect to the material for fast and homogenizing mixing.
  • It can perform homogenously dry Mixing of free flowing powders, granules requiring low shearing force. Mixing and Blending of particles with rapid intermixing of particles irrespective of varying specific gravities.
  • The material is loaded into the double cone blender drum.
  • The double cone blender is tumbles the material in the container and spread out. The mixing is achieved in 10 to 20 minutes with better homogeneity.


  • Available Capacity model in Double Cone Blender 25 kg to 6000 kg batch size.
  • Design as per GMP and cGMP Model
  • MOC : SS 304 , SS 316 , SS 316L
  • All Product Contact parts SS 316 / 316L & Non Contact parts SS 304.
  • The conical shape of both ends enables uniform mixing and easy discharge.
  • Double Cone shape product container is for Ideal dry mixer for lubrication of granules and homogenization mixing of multiple batches in to single batch.
  • Maximum care has been taken to ensure for safe operation of the unit.
  • Manual rotating facility with hand wheel for inching. The same will be provided with SS cover & limit switch. ( In 200 Kgs. & above model )
  • Safety rod (2 nos.) provided at back side. (on LH side & other on RH side )
  • Suitable size of butter fly valve at one end of the cone provided for material discharge & hole with Openable cover provided at other end of the cone for material charging & Cleaning.
  • On shaft with (04 nos. )fixed baffles with mirror polished provided inside the cone. Fixed baffles provided for lumps breaking.
  • Cone is mirror polished from the inside & outside & structure will be matt polished.
  • All moving non contact parts covered with SS 304 covers.
  • “A” type rigid structure of the machine with two sides resting of product container.
  • Product container having discharge with butterfly valve and man hole.
  • Charging hole with hinged lid with seal for charging and cleaning.
  • The product container rotates on sped 8 RPM.
  • Safety guards made from SS304 pipes provided in front of the m/c with limit switch.
  • Panel fabricated from SS304 material with facility of three phase indication, D.O.L. Starter, digital timer & Amp. Meter
  • As per client requirement machine will be provided with left side drive or with right side drive.
  • Maximum care has been taken to ensure safe operation of the unit.
  • Enclosed rigid drive with reduction gear box and motor. Worm reduction gear use for speed reduction.
  • Food grade rubber gasket will be used on both end of cone as well as in butterfly valve.
  • Inside & outside of the cone will be polished to the mirror finished.
  • Safety guards provided with limit switch to not start the machine when safety guards are not in proper position.

Optional Features :

  • AC variable frequency drive (VFD).
  • PLC Controls with HMI touch screen,
  • Flame proof motor and Push Button station.
  • Rotary intensifier with AC variable drive.
  • Inline milling and loading with vacuum transfer systems.

Charging Option:

  1. Loading & Unloading by Product container with Jacking trolley.
  2. Vacuum conveying system.
  3. Bin loading by hydraulic hoist

Safety Features :

  • Safety railing with limit switch.
  • Overload protection and emergency stop.
You cannot copy content of this page